HOW TO CHOOSE ETHERNET CABLES / ETHERNET PATCH CORDS Quote Requests
Buy Online All cables are fully assembled, tested and ready to use in any 10Base-T, 100Base-TX or 1000Base-TX (Gigabit Ethernet) network. They all have superior molded anti-snag
strain reliefs. Ethernet Cable Application Review: The table below defines the speed / frequency and the pairs for the following Ethernet applications: 10BaseT, 100BaseT4, 100BaseTX, 100BaseT2, and 1000BaseT
| |
Frequency
(MHz) |
Symbol Encoding |
Signal Rate (Mbaud) |
Symbol
Rate |
Data
Encoding |
Pairs/Transmit Channel |
Pairs
Used |
Min Category
Required |
10BaseT |
10 |
Manchester |
10 |
10 |
None |
1 |
2 |
3 |
100BaseT4 |
12.5 |
Multi-level, 2T/Hz |
25 |
25 |
8B6T |
3 |
4 |
3 |
100BaseTX |
31.25 |
MLT-3 |
125 |
125 |
4B5B |
1 |
2 |
5 |
100BaseT2 |
12.5 |
PAM5x5 (2D-PAM5) |
25 |
12.5 |
None |
2 |
2 |
3 |
1000BaseT |
31.25 |
4D-PAM5 |
125 |
31.25 |
None |
4 |
4 |
5* |
Applicable Standards:
Category 5/5e/6
ANSI/TIA/EIA-568-A/B
Practical uses of Category Cables:
Cable Category |
Rated Frequency Bandwidth (MHz) |
Common Uses |
Category 1 |
None |
|
Category 2 |
1 |
Telephone Wiring |
Category 3 |
16 |
Telephone Wiring, 10Base-T |
Category 4 |
20 |
Token-Ring, 10Base-T |
Cat 5 |
100 |
100Base-TX, 10Base-T |
Cat 5e |
100 |
1000Base-T, 100Base-TX, 10Base-T |
Cat 6 |
250 |
1000Base-T, 100Base-TX, 10Base-T |
 Increasing category levels are backward compatible.Category 6 (ANSI/TIA/EIA-568-B.2-1) was ratified by the TIA/EIA in June 2002.
CAT-6 provides higher performance than CAT-5e and features more stringent specifications for crosstalk and system noise. All CAT-6 components are backward compatible with CAT5e, CAT5, and
Category 3. If different category components are used with higher category components, then the channel will be limited to the performance of the lower category.
Category 6 Patch cords / Cat 6 Patch cables  Our precision designed Ethernet Cat6 patch cords and patch cables provide the high speed you require for your installation. They minimize
near-end crosstalk and are backward compatible with slower protocols. Each patch cord is created with a slender, snagless boot to provide easy access in high-density installations. These patch cords are perfect for Fast
Ethernet, Gigabit Ethernet, and other speed-critical applications. All Ethernet patch cables are individually tested for peak performance and are available in various lengths and colors. Our Category 6 cables are manufactured to the strictest performance requirements as specified in TIA/EIA-568-B.2-1 using the
highest level connector design and cable construction.
Cat7 Ethernet Patch Cables, Cat 7 Ethernet Patch Cords
What is the difference between CAT-5, CAT-5e, CAT-6, CAT-7 Ethernet Cables The Simple Answer:
CAT-5 is rated to 100M
CAT-5e is rated to 350M
CAT-6 Ethernet cables and CAT6e are rated to 550M or 1000M depending on your source
CAT-7 Ethernet cables are
supposedly rated to 700M or presumably 1000M
Contractors and Installers - call for volume pricing! | Cat5, Cat5E, Cat6, Cat7 Comparison | Premise Wiring | Network Cables / Ethernet Cables | Crossover Cables |
| Fiber Optic Cable Assemblies | Mode Conditioning Fiber | DS3 Patch Cables | DS1/T1 Cables | |
